NL3011 is a higher pressure version of NL3010. It is a standard duty petroleum transfer hose, not subject to excessive abuse, dragging, or continuous service/handling. Its nitrile rubber will resist gasoline, kerosene, diesel, ethanol (not recommended for Biodiesel at this time), hydraulic fluids, hydrocarbons, fats, greases, animal/vegetable oils, hot/cold water (not food grade), and other petroleum based fluids or wastes with low aromatic content. It can be used for bulk transfer or general in-plant applications. This hose is NOT designed for use on reels (as it has a wire helix) and NOT designed for marine or aggressive applications, refer to our NL3020 or other specialty petroleum transfer hoses. For short lengths (i.e. 3ft) or permanent installations where the hose cannot be inspected or tested at regular intervals, consider using a Stainless Steel braided hose.

Construction: Tube: Smooth, black nitrile. Cover: Wrapped, smooth, black nitrile blend. Reinforcement: Wire helix between synthetic textile plies and static wire.

Typical Fittings: Interlocking N10GY/N12GY along with WI- ferrules. W10-CS-xxxx or W10XH-CS-xxxx swage combination nipples (oil return only, do not use steel with gasoline), testing & certification.

Temperature Range: -20°C (-4°F) to +70°C (158°F)

Warning: <<Special Swage Couplings needed for higher pressures>>

Cut Method: Sawzall or Hacksaw & Side Snips for Wire-Wear Safety Gloves