During the manufacturing of our high pressure tubing there are multiple cold-draw reductions, intermediate anneals, and a dead-soft anneal after final sizing of the tube. The tubing is then plugged or capped off to maintain cleanliness during shipment. The result is a quality tubing which is consistent, bendable and easy to flare, and clean on the inside. Tubing should be handled carefully - do not scratch or gouge the outside, or drag it through racks or over the ground/equipment, these small marks create imperfections and possible leak paths at the fittings. When assembling, do not over-tighten (refer to SAE tightening recommendations, the 1/4" turn method will work in some applications/sizes). The carbon steel seamless tubing meets or exceeds ASTM A179 CDS or J524b governing standards, while the stainless (Suffix SS) meets ASTM A269 or A213 standards. Custom tube bending & flaring is available, please contact our Customer Service Team for details.

Construction: 316SS seamless tube

Typical Fittings: TM8000 Series Metric Compression Fittings

Temperature Range: -196°C (-321°F) to +649°C (1200°F)

Detail Comments: Other sizes and wall thicknesses available on request. Metric tubing is sold in 6 meter lengths and subject to special freight costs.

Cut Method: Bench Mount Electric Saw // Wear Ear & Eye Protection