NL1060 is a heavy duty hose, designed for demanding applications. This hose provides a long service life in construction, mining, or quarry applications. Its steel reinforcement withstands abuse, tugging, and pulling. The cover provides abrasion and weather resistance, while the tube is resistant to heat and oil "mist" from compressors. If the tube is exposed to excessive oil, the hose may swell and fail prematurely; prolonged heat may also degrade the rubber compounds. For higher oil and heat resistance refer to our NL1064 Blue Heavy Duty High Temp and NL1065 Boston Bull Dog. For a lighter weight hose with resistance to abrasion and oil, refer to our NL1395 Gorilla. NL1060 meets RMA Class B standards (medium/high petroleum-based oil resistance; do not use this hose with vegetable oil or mineral oil).

Construction: Tube: Black NBR. Cover: Wrapped, yellow NBR/PVC flame, abrasion, weather and ozone resistant. Reinforcement: High tensile steel braid.

Typical Fittings: 1/2-1" Universals (NOT 1-1/4-2" 4-lugs, refer to coupling warnings), Double Lock/Twist Lock, N176 Hex Nipples, N315/320 Long Shanks (water only), 1/2"-1" Hose Punch Clamps/Crimp Sleeves, Ground Joint Interlocking Bolt Clamp Couplings (re-tighten before each use due to the cold flow/setting of rubber hoses). Crimp sleeves not recommended on 1-1/4"-4" HD air due to thick wall & temperatures - use interlocking bolt clamps. Whipcheck Safety Cables or hose halters are mandatory on HD air hoses.

Temperature Range: -30°C (-22°F) to +85°C (185°F)

Detail Comments: Continuous lengths to 400ft are available on special request.

Cut Method: Portable Band Saw or Sawzall - Wear Safety Gloves