This is a quality, high temperature 400 psi push-on hose suitable for hydraulic oil up to 149°C (300°F). It will also handle air up to 121°C (250°F) and water up to 149°C (300°F). Due to its special AQP elastomer construction it is suitable for higher continuous operating temperatures and it is estimated it will last 5 times longer than standard push-on hoses in high temperature applications. It is not recommended for hydraulic impulse applications and not approved for air brake applications. FC332 is MSHA approved for underground mining applications. NOTE: Multi-Purpose Hoses ARE NOT INTENDED for critical applications or permanent mechanical installations, such as interior plumbing applications, heat pump connectors, natural gas, critical fluids, etc.

Construction: Tube: Black seamless, oil and heat resistant AQP elastomer. Cover: Blue, oil, abrasion, and weather resistant AQP elastomer. Reinforcement: Textile braids (specially angled for push-on fittings).

Typical Fittings: Brass N68011 or stainless "Push-On fittings" which are specifically designed for use on "Push-On" hoses up to 300 psi (do not use on any other type of hose). When used with Push-On hose, the defined barb on the fitting and the special hose reinforcement will provide sufficient grip thereby eliminating the need for any hose clamps.

Temperature Range: -40°C (-40°F) to +150°C (302°F); air not to exceed +121°C (250°F). AQP is not rated for steam use.

Cut Method: Ratchet Cutter (<2"ID ) Safety Scissors - Wear Safety Gloves