Register Login
Cart (0) | Total USD$0.00

LPG-T1-MIQCC: Type 1 Rubber Propane Hose w/ Male Invert Flare x QCC1 Acme

LPG-T1-MIQCC: Type 1 Rubber Propane Hose w/ Male Invert Flare x QCC1 Acme

NL1770 is a CGA 8.1 approved hose for hydrocarbons, such as liquid or gaseous propane, butane, or a combination of these gases. It can be used for natural gas in its 'gaseous' state - it is NOT designed for 'liquid' natural gas (refer to our NL4395 Cryogenic). NL1770 is commonly used on barbecues, trailers, camping equipment, and space heaters. Type 1 propane hose must be used in a well ventilated area and is NOT designed for use underground service, or use on automobiles, forklifts, or mobile equipment (must use Type III for all mobile equipment). All coupled assemblies are ULC labeled and are to be installed by a licensed gas fitter only.

Construction: Tube: Nitrile rubber. Cover: Smooth, black, pin-pricked synthetic rubber. Reinforcement: High-tensile braided yarn.

Temperature Range: +51°C (124°F) to +60°C (140°F)

Detail Comments: For sizes up to 1", -51°C (-60°F) to +60°C (140°F). For sizes 1-1/4" & 1-1/2", -40°C (-40°F) to +82°C (180°F).

I4C12MI4QCC 1/4" TYPE 1 RUBBER PROPANE X 12" w/MALE INV FLARE X QCC1
N - Non Stock - Minimums, Lead Time 0.29 lbs
I4C18MI4QCC 1/4" TYPE 1 RUBBER PROPANE X 18" w/MALE INV FLARE X QCC1
B - Stock - Common, Used Often 0.40 lbs
I4C24MI4QCC 1/4" TYPE 1 RUBBER PROPANE X 24" w/MALE INV FLARE X QCC1
D - Regional Stock 0.30 lbs
I4C36MI4QCC 1/4" TYPE 1 RUBBER PROPANE X 36" w/MALE INV FLARE X QCC1
N - Non Stock - Minimums, Lead Time 0.48 lbs
I4C48MI4QCC 1/4" TYPE 1 RUBBER PROPANE X 48" w/MALE INV FLARE X QCC1
N - Non Stock - Minimums, Lead Time 0.60 lbs
I4C60MI4QCC 1/4" TYPE 1 RUBBER PROPANE X 60" w/MALE INV FLARE X QCC1
N - Non Stock - Minimums, Lead Time
Related Products & Categories
Product added to cart
Use Chrome for faster page loading!
CLOSE - X