Chem-One has many similar handling characteristics to Fabchem, but is suitable for higher temperatures and has a more abrasion resistant cover. Its slightly corrugated cover permits extra flexibility and ease of handling. Its special cover is highly resistant to kinking, weathering, and abrasion. To prevent contamination, Chem-One can be safely steam cleaned (can be open end steam cleaned for 5 minutes with 50 psi steam at 142°C (288°F)) without affecting performance. It is advisable to test the tube material prior to field use and ensure all coupled lengths are fully certified prior to use. All chemical hoses should be drained and flushed after each use.

Construction: Tube: Smooth, beige Alphasyn modified XLPE. Cover: Slightly corrugated, black Omegasyn abrasion resistant EPDM with a red spiral stripe. Reinforcement: Synthetic fabric with two wire helix.

Typical Fittings: Swage/crimp fittings, camlocks (confirm chemical compatibility). Use interlocking N10GY/N12GY along with WI- ferrules. Testing & certification (NOT internal expansion Scovills due to the inability of the tube to expand). Always confirm compatibility of coupling and gasket with material being conveyed.

Temperature Range: -40°C (-40°F) to +121°C (250°F), but upper range is contingent on specific chemical being conveyed.

Detail Comments: Other sizes available in full rolls on special request.

Warning: Critical App, Ground Wire when Coupling-Confirm Gasket Type

Cut Method: Sawzall or Hacksaw & Side Snips for Wire-Wear Safety Gloves