A9015 is a specialty paint spray hose that is designed for highly dangerous working pressures up to 7300 psi. A9015 is a high tensile wire reinforcement. Its seamless nylon tube is resistant to many paints, industrial coatings, resurfacing liquids, and certain chemicals. Its specially formulated, low-temperature urethane cover is resistant to abrasion, cutting, and weathering. This product is sold in factory assembled lengths - it is normally supplied in 25 ft, 50 ft, or 100 ft assemblies with female swivel ends. Shorter 'whip' assemblies (at the operator end) reduce costly replacements - they typically come in 3 ft or 6 ft lengths with female swivel NPSM x male NPT ends. Each assembly must meet certain conductivity requirements. NEVER attempt to repair an airless paint spray hose. Refer to A9010 for pressures up to 3300 psi.

Construction: Tube: Smooth, seamless nylon tube with a layer of static dissipating CPS polymeric compound. Cover: Smooth, blue, pin-pricked polyurethane compound. Reinforcement: A9010 has layers of high tensile fabric. A9015 has high tensile wire.

Typical Fittings: Factory installed ends with springs; all lengths must meet proper conductivity requirements and once the hose has been used, it cannot be re-crimped or repaired. This hose is NOT to be repaired for safety, liability, and warranty issues.

Temperature Range: -54°C (-65°F) to +100°C (212°F)

Warning: This Hose Used in Dangerous Applications. Do NOT Repair.

Cut Method: Bench Mount Electric Saw // Wear Ear & Eye Protection