Layflat Air provides an alternative from heavy, bulky conventional air hoses. It is an extremely light and compact hose that is easily coiled and stored when not in use. Due to its relatively thin wall construction, this hose is not recommended in very rugged applications, but it does have surprisingly good puncture and scuff resistance. Its nitrile composition also provides resistance to heat, oil, diesel, grease, acids, sewage, and salts. The ribbed cover reduces dragging friction to prolong life. NOTE: Take caution when running this hose at high pressure or with excessive end pull as it may result in coupling retention issues. Use a traditional rubber hose for higher temperatures directly off compressor outlet.

Construction: Yellow nitrile rubber/PVC blend with an embedded woven high-tensile polyester reinforcement.

Typical Fittings: 1/2-1" Universals (NOT 1-1/4-2" 4-lugs, refer to coupling warnings), Double Lock/Twist Lock, N176 Hex Nipples, N315/320 Long Shanks (water only) and 1/2"-1" Hose Punch Clamps/Crimp Sleeves. Whipcheck Safety Cables or hose halters are mandatory on HD air hoses.

Temperature Range: -30°C (-22°F) to +75°C (167°F). For high temps off outlet, use traditional rubber hose

Detail Comments: Take caution when running this hose at high pressure or with excessive end pull as it may result in coupling retention issues. Continuous lengths up to 200' or longer are available on special request.

Cut Method: HD Safety Scissors - Wear Safety Gloves