Register Login
Cart (0) | Total USD$0.00

A8209-H1: Textile Concrete 1233# Hose with One Heavy Duty Flanged End

A8209-H1: Textile Concrete 1233# Hose with One Heavy Duty Flanged End

NL8209 is a competitively priced alternative to domestically manufactured concrete hoses on the market. It is a durable, long lasting and kink resistant hose. Suitable for plaster, grout, wet shotcrete, for buildings, swimming pools, or construction sites. Service life of material handling hoses may vary depending on the operating conditions, hours of use, and the product being conveyed. Always rotate the hose regularly for even wear and inspect the tube for degradation before use. *Service life of material handling hoses may vary depending on the operating conditions, hours of use, and the product being conveyed. Always rotate the hose regularly for even wear and inspect the tube for degradation before use. Concrete hose is typically not repaired as the wall/tube will wear down during service, and therefore the coupling integrity is significantly compromised if re-installing an end.

Construction: Tube: Smooth, black SBR rubber. Cover: Wrapped, smooth, black SBR rubber. Reinforcement: Multiple spiral plies of high strength fabric.

Typical Fittings: WFT-CS Heat treated swaged ends (HD California flanged ends for concrete pump hose, DO NOT use Grooved or NPT ends for concrete pump service). N95 Galvanized Internal Expansion (1"-1-1/2"). Whipcheck Safety Cables & Nylon Slings (must be properly installed in an extended position). *SPECIAL NOTE: Concrete hose is typically not repaired as the wall/tube will wear down and therefore the coupling integrity is significantly compromised if re-installing an end.

Temperature Range: -40°C (-40°F) to +80°C (176°F)

Detail Comments: Working pressures shown based on this hose being used to transfer concrete, not for water or other fluids. For non-concrete applications the working pressure will vary depending on the safety factor required (as an example for water, certain sizes could be rated to 500-600 psi). *SPECIAL NOTE: Concrete hose is typically not repaired as the wall/tube will wear down and therefore the coupling integrity is significantly compromised if re-installing an end.

Warning: Critical Application-Follow Coupling/Maintenance Procedures

A8209250X12-H1 2-1/2" X 12.5FT TEXTILE CONCRETE 1233# w/ONE HD FLANGE END
P - Made From Bulk Stock - Lead Time 29.96 lbs
A8209300X10-H1 3" X 10FT TEXTILE CONCRETE 1233# w/ONE HD FLANGE END
P - Made From Bulk Stock - Lead Time 24.65 lbs
A8209300X12-H1 3" X 12.5FT TEXTILE CONCRETE 1233# w/ONE HD FLANGE END
P - Made From Bulk Stock - Lead Time 37.60 lbs
A8209300X15-H1 3" X 15FT TEXTILE CONCRETE 1233# w/ONE HD FLANGE END
P - Made From Bulk Stock - Lead Time 43.55 lbs
A8209300X20-H1 3" X 20FT TEXTILE CONCRETE 1233# w/ONE HD FLANGE END
P - Made From Bulk Stock - Lead Time 55.45 lbs
A8209300X25-H1 3" X 25FT TEXTILE CONCRETE 1233# w/ONE HD FLANGE END
P - Made From Bulk Stock - Lead Time 67.35 lbs
A8209350X10-H1 3-1/2" X 10FT TEXTILE CONCRETE 1233# w/ONE WFT LNG REDUCING
P - Made From Bulk Stock - Lead Time 32.43 lbs
A8209350X12-H1 3-1/2" X 12.5FT TEXTILE CONCRETE 1233#w/ONE WFT LNG REDUCING
P - Made From Bulk Stock - Lead Time 43.68 lbs
A8209350X15-H1 3-1/2" X 15FT TEXTILE CONCRETE 1233# w/ONE WFT LNG REDCG END
P - Made From Bulk Stock - Lead Time 49.93 lbs
A8209350X20-H1 3-1/2" X 20FT TEXTILE CONCRETE 1233# w/ONE WFT LNG REDUCING
P - Made From Bulk Stock - Lead Time 62.43 lbs
A8209400X10-H1 4" X 10FT TEXTILE CONCRETE 1233# w/HD FLG ONE END ONLY
D - Regional Stock 34.90 lbs
A8209400X12-H1 4" X 12.5FT TEXTILE CONCRETE 1233# w/ONE HD FLANGE END
P - Made From Bulk Stock - Lead Time 49.45 lbs
A8209400X20-H1 4" X 20FT TEXTILE CONCRETE 1233# w/ONE HD FLANGE END
P - Made From Bulk Stock - Lead Time 73.00 lbs
Related Products & Categories
Product added to cart
Use Chrome for faster page loading!
CLOSE - X