Please Register or
Cart (0) | Total CAD$0.00

A1395-41 - Yellow Gorilla Multi-Purpose/Boss Ground Joint Couplings

If you are tired of wearing out and replacing expensive heavy duty yellow air hoses, Gorilla could be your solution. Gorilla is a premium, hi-visibility yellow multi-purpose hose used in factories, construction, agriculture, quarries, mines, railroads, oil/gas industry, and ship building. Its exceptionally tough, MSHA approved cover will resist heavy amounts of oil and abrasion, while its tube resists heat, excessive petroleum based oil as well as vegetable oil and mineral oil (typically breaks down more economical rubbers). Due to its textile reinforcement, Gorilla is 30-40% lighter in weight as compared to heavy duty, steel wire reinforced yellow air hoses. This hose will last much longer than traditional textile braided air hoses and will handle much more rugged conditions. Gorilla was designed to reduce handling costs, inventory costs, replacement costs, down time, and safety concerns.

Typical Fittings: N400 Brass barbs (up to 3/8"), Universals, Ground Joints, Double Lock/Twist Lock Quick Acting, N176 Hex Hose Nipples, N315/320 Long Shanks (water only), GJS/IMS series machined ground joint stems (must be coupled with WIL series extra-long interlocking crimp ferrules), punch clamps/crimp sleeves on small ID sizes (up to 1"), interlocking bolt clamps (crimp sleeves are not recommended on large bore heavy duty air hose applications such as 1-1/4" to 4" due to the tough cover and wall thickness - use interlocking bolt clamps). Note: 1-1/4"-2" 4-lug Universals should only be used in non-critical fluid transfer applications, they are NOT be used in critical applications or heavy duty air, it is a relatively poor and unsafe design for proper coupling integrity. Whipcheck Safety Cables or hose halters are mandatory on heavy duty air hoses for safety reasons. Interlocking bolt clamps MUST be checked and re-tightened before EACH use due to the cold flow/setting characteristics of rubber hose!

Construction: Tube: Smooth, black Chemigum (RMA Class A). Cover: Smooth, yellow Carbryn rubber blend (MSHA approved, RMA Class A). Reinforcement: Lightweight, high quality Flexten Cord with a 4:1 safety factor.

Temperature Range: -29°C (-20°F) to +88°C (190°F)

Detail Comments: Spuds are sold separately. Always re-tighten bolt clamps before EACH use.

Notice: Dangerous Assembly, ensure coupled/maintained properly.

Product Name SKU Price Add to Cart Availability Weight (lbs)
Call for Availability 74.63
Use Chrome for faster page loading!