Hydraulic Ball Valves, Gate Valves, and Butterfly Valves - 065

These ball valves are commonly used in high pressure hydraulic or water applications. They have blow-out proof stems and come standard in either a plated or 316 stainless body/ball/stem with Buna-N O-rings and POM/delrin ball seats. Replacement parts are available, but different manufacturers do NOT interchange, making it difficult to repair.

N10704 is a high pressure, square body, plated steel valve commonly used in hydraulic or water applications. They are full port up to -100 size and are a reduced port after that. Standard seals are...

N10704 - NPT 2 Way Plated Steel Ball Valve

7 Items

N10704-SS is a high pressure, square body, stainless steel valve commonly used in hydraulic or water applications. They are full port up to -100 size and are a reduced port after that. Standard sea...

N10704-SS - NPT High Pressure Stainless Steel Square Body Ball Valve

7 Items

N10705 is a high pressure, square body, plated steel valve commonly used in hydraulic or water applications. They are full port up to -100 size and are a reduced port after that. Standard seals are...

N10705 - ORB 2 Way Square Body Ball Valve

10 Items

N10706 is a high pressure, square body, plated steel valve commonly used in hydraulic or water applications. They are full port up to -100 size and are a reduced port after that. Standard seals are...

N10706 - BSPP 2 Way Steel Ball Valve

9 Items

N10706-SS is a high pressure, square body, stainless steel valve commonly used in hydraulic or water applications. They are full port up to -100 size and are a reduced port after that. Standard sea...

N10706-SS - BSPP Stainless Steel 2 Way Steel Ball Valve

2 Items

N10720 is a high pressure, round body, plated steel valve commonly used in hydraulic or water applications. They are a full port valve with Buna-N O-rings and POM/delrin ball seats, but other materi...

N10720 - 1-NPT Round Body Full Port 2 Way Plated Ball Valve

6 Items

These 3-way diverter valves require the center port to be the inlet (pressurized). They work in an L flow pattern to either side.

N10714 - NPT 3 Way Diverter Plated Ball Valve (Center Inlet, L-Flow)

16 Items

These 3-way diverter valves require the center port to be the inlet (pressurized). They work in an L flow pattern to either side.

N10715 - SAE ORB 3 Way Diverter Plated Ball Valve (Center In/L-Flow)

6 Items

These 3-way diverter valves require the center port to be the inlet (pressurized). They work in an L flow pattern to either side.

N10716 - BSPP 3 Way Diverter Carbon Steel Ball Valve (Center In/L-Flo

3 Items

These 3-way diverter valves require the center port to be the inlet (pressurized). They work in an L flow pattern to either side.

N10724 - NPT Round Full Port 3 Way Diverter Ball Valve (Cntr In/L-Flo

3 Items

These are "true" 3-way ball valves that can be pressurized from any port (whereas standard ones typically can only be pressurized by the center port only). As with other diverter ball valves, these ...

N10727 - NPT True 3 Way Diverter Ball Valve (Any Port In/L-Flow)

5 Items

Excavator ball valves are a specialty ball valve redesigned for use on excavator sticks for controlling attachments. Their design has no handle and incorporates a hex valve stub for use with wrench o...

N10734 - NPT 3 Way Excavator Style Plated Ball Valve

4 Items

N10735 is a ORB threaded, plated steel, three way ball valve that is designed for use on excavator sticks for controlling attachments. The design has no handle and incorporates a hex valve stub for ...

N10735 - ORB 3 Way Excavator Style Plated Ball Valve

4 Items

N10740 & N10742 are a high pressure, split flange, plated steel valve commonly used in hydraulic or water applications. They are square body up to -100 size and are a round body after that. Standar...

N10740 - Code 61 & Code 62 Split Flange Plated Ball Valve

12 Items

N10745 & N10747 are a high pressure, flange block, plated steel valve commonly used in hydraulic or water applications. They are square body up to -100 size and are a round body after that. Standar...

N10745 - Code 61 & Code 62 4-Bolt Flanged Plated Ball Valve

12 Items

N10748 is a high pressure, split flange by flange block, plated steel valve commonly used in hydraulic or water applications. They are square body up to -100 size and are a round body after that. S...

N10748 - Code 61 x Flat Face Block Body Plated Ball Valve

4 Items

Buna-N Rebuild Kits allow users to maximize the value of their valves by replacing leaking seals at a lower cost than total unit replacement. Kits are brand specific, and also available in higher te...

N10700CK - Buna-N Rebuild Kit Hydraulic Valve (Mfg Brand Specific Only)

16 Items

N10700LK - Plated Steel L-Style Lock For HP Valves (Mfg Brand Specific)

6 Items

This replacement handle comes in 3 sizes: -013(1/8") to -050(1/2"), -075(3/4") to -100(1") and -125(1-1/4") to -200(2"). The two smaller sizes are stainless steel and the largest size is plated stee...

N10700RA - Stainless Offset Handle with Square Head For HP Valves

3 Items

This replacement handle comes in one size for 1-1/4"-2" high pressure ball valves and is long enough to provide the operator with leverage to operate the valve.

N10700RB - Plated Steel Flat Handle with Square Head For HP Valves

1 Item

This replacement handle comes in 3 sizes: -013(1/8") to -050(1/2"), -075(3/4") to -100(1") and -125(1-1/4") to -200(2"). The handle is plated steel and are offset to reduce the chance of operator in...

N10700RC - Plated Steel Offset Handle with Star Head For HP Valves

3 Items

This replacement handle comes in one size for 1/8"-1/2" high pressure ball valves and is long enough to provide the operator with leverage to operate the valve. The connection is adjustable star head...

N10700RD - Plated Steel Flat Handle/Adjustable Star Head For HP Valves

1 Item

This aluminum replacement handle comes in one size for 3/4"-1" high pressure ball valves and is long enough to provide the operator with leverage to operate the valve. The connection is star head, al...

N10700RE - Red Aluminum Flat L Handle with Star Head For HP Valves

1 Item

This replacement handle comes in one size -075(3/4") to -200(2"). The handle is plated steel and are offset to reduce the chance of operator injury while operating the valve. The connection is star...

N10700RF - Plated Steel Offset Handle/Adjustable Star Head For HP Valve

1 Item

N10708 is a square body, high pressure, plated steel valve commonly used in hydraulic or water applications. Standard seals are Buna-N O-rings and POM/delrin ball seats, but other materials are avail...

N10708 - Metric DIN Plated Steel 2-Way Male Threaded Ball Valve

17 Items

These valves are supplied with a reduced port which allows for the ultra-high pressure ratings. They come in carbon steel body/ball/stem with Buna-N O-rings and delrin ball seats or 316 stainless bod...

N10710 - NPT High Pressure Black Carbon or Stainless Steel Ball Valve

10 Items

These are a reduced port, 1-piece body valve suitable for 2000 psi oil or gas (plain carbon steel typically not used with water as it will rust).

N10703 - NPT 1-Piece 2000 PSI Carbon Steel Ball Valve

8 Items

N10700LKN - Plated Steel L-Style Lock For HP Valves (NL Brand Specific)

3 Items

N10749 - Code 62 x Flat Face Round Body Plated Ball Valve

2 Items